This kit provides everything you need to install a 12" (30.5cm) deep Shelf & Rod shelf in your chosen length using our Fixed Mount system.
This item will NOT work with our ShelfTrack system.
The shelf will install to solid brick walls or stud plasterboard, and will also fix to wood, which is at least 1" (2.54cm) thick.
The shelf is made from steel wire, with a white vinyl coating and is ideal for storing linens, allowing air to circulate around them with its mesh design. You can also use it for storing household cleaning goods, books...pretty much anything you can think of!
With the integrated hang rod, you also have the option to hang garments so this also makes a great addition to laundry rooms, guest bedrooms or cloakrooms.
Available in the following lengths;
61cm (2')
91cm (3')
122cm (4')
183cm (6')
244cm (8')
The shelves can be trimmed down to the exact size you require using boltcutters or a hacksaw. The cut ends will be covered by small plastic end caps provided in the shelf kit.
Each shelf is sold separately.
Your shelf will be installed using Wall Clips along the back edge of the shelf, and Shelf Brackets which will either mount to side walls, where available, or onto the back wall where side walls are missing.
Please select the available side walls that you have to fix to using the options above, so that we can send you the correct hardware;
Wall - Wall indicates side walls at each end.
Wall - Open indicates a wall on the left side of the shelf but not the other.
Open - Wall indicates an 'open end' and a side wall at the right end.
Open - Open indicates that only the back wall is available to fix to, and no side walls are present.
Please note that any available side walls must be at least 35cm (14") wide to accommodate the side wall brackets.
Bear in mind that once garments are on hangers they generally protrude between 51cm (20") and 56cm (22") from the back wall.
You CANNOT use this Shelf & Rod shelf kit with our adjustable ShelfTrack system. The fixings provided are for Fixed Mount.
