Wall Clips (991) are required attach shelving to back wall of your enclosure. You will need to order one clip for every foot of shelf you are created PLUS one more.
End caps are required to neatly finish shelving.
For a 10"/ 25.4cm deep Shelf & Rod shelf you will need 4 x 203 small end caps and 4 x 204 large end caps per shelf For a 12"/ 30.5cm deep Shelf & Rod shelf you will need 4 x 203 small end caps and 4 x 204 large end caps per shelf For a 16"/ 40.6cm deep Shelf & Rod shelf you will need 6 x 203 small end caps and 4 x 204 large end caps per shelf Open End Caps (168) are used instead of 204 end caps when a shelf does not butt up to a wall, to stop hanger slipping off of the 'open ends'
For a 12"/30.5cm deep SuperSlide shelf you will need 10 x 203 small end caps For a 16"/40.6cm deep SuperSlide shelf you will need 12 x 203 small end caps
Deck Wire Caps (114) are ONLY required if you are cutting the smaller 'deck' wires out around an obstacles. These caps do NOT fit over the ends of the shelves.
